ABREX 600 Plates

ABREX 600 Plates

ABREX 600 Plates Suppliers, NICRODUR 600 Plates, Abrasion Resistant 600 Steel Plates, Wear Resistant ABREX 600 Plates, High Quality RAEX 600 Plates, AR 600 Hot Rolled Plates, ABREX 600 Plates Stockist in Mumbai, India.

High Strength ABREX 600 Plates, BHN 600 Plates, ABREX 600 Cold Rolled Plates, ABREX 600 Sheet and Plate Exporter, ABREX 600 Plates Dealer, ABREX 600 Plates Supplier in Mumbai, India.

Triton alloys consider that commercial success and corporate liability should go hand-in-hand. We have to, therefore, recognize and direct the impact of our business and its payment to society. Responsible performance is not just an ethical technique to act. It has highly strict excellence controls are implemented on every step of manufacture to ensure the product excellence delivering to the market.

Abrex 600 plates have a lot of values provided by stainless steel make it an influential candidate in materials selections. Stainless steel is in effect low carbon steel which contains chromium at additional by weight. It is the addition of chromium that provides the steel of its unique stainless, decay resisting properties.

The use of abrasion resistant abrex steel plate obviously reduces the heaviness of structural members uncovered to severe abrasive conditions. Compared with usual steel, abrex steel plate reduces structural heaviness and delivers financial merits.

The chromium satisfied of the steel allows the structure of a rough, adherent, invisible, corrosion-resisting chromium oxide film on the steel outside. If damaged mechanically or chemically, this film is self-healing, as long as that oxygen, even in very small amounts, is here. The corrosion confrontation and other functional properties of the steel are better by improved chromium content and the adding of extra elements such as molybdenum, nickel, and nitrogen.

However, the entire group can be separated into five classes. Each is recognized by the alloying elements which affect their microstructure and for which everyone is named.

BRAND OF AR 600 Plates

Brand
Manufacture/Co
HARDNESS RANGE
C.E.V. Typical Values
Values for AR 600
Thk: 10 – 20
Hardox 400
SSAB
370-430
0.37
QUARD 400
DUFERCO
370-430
0.42
JFE EVERHARD 360LE
JFE STEEL CORPN.
360-430
0.38
SUMIHARD K400
SUMITOMO METALS
400-440
0.46
ABRAZO 400
TATA UK LTD.
360-430
0.43
RAEX 400
RUUKKI
360-430
0.43
DILLIDUR 400V
DILLINGER HUTTE
370-430
0.43
XAR 400
THYSSEN KRUPP
370-430
0.43
BRINAR 400
ILSENBURGER GROBBLECH
360-430
0.48
FORA 400
INDUSTEEL
360-430
0.48
HARDPLAST 380
ISD HUTA
360-430
0.56
NICRODUR 400
ACRONI
360-430
0.56
CREUSABRO 4800
INDUSTEEL
360-430
0.48
WELHARD 400
NSC/JAPAN
400-440
0.46
BIS Plate 320
Bisalloy Steels Pty Ltd
320-360
0.4
BIS Plate 400
Bisalloy Steels Pty Ltd
370-430
0.4
BIS Plate 450
Bisalloy Steels Pty Ltd
425-475
0.48
Rockstar 400
Essar Steel India Ltd.
370-430
0.45
Rockstar 450
Essar Steel India Ltd.
425-475
0.52
Rockstar 500
Essar Steel India Ltd.
450-540
0.6
Abrex 400
NSSMC
360-440
0.4
Abrex 450
NSSMC
410-490
0.5
Abrex 500
NSSMC
450-550
0.55
Abrex 600
NSSMC
550-650
0.73

Corrosion resistance: Lower alloyed grades resist decompose in an impressive and pure water surroundings, while high-alloyed grades be able to oppose decay in most acids, alkaline solution, and chlorine manner situation, properties which are utilize in way of action. Fire and heat resistance are in particular high chromium and nickel-alloyed grades oppose scaling and retain power at high temperatures.

Weldability: it is measured that cold cracking is the result of the agreement of three factors: hardening of the weld zone, accumulation of diffusible hydrogen, and constrain stress. Of them, the solidify of weld zone has a lot to do with steel, and as an index of cold break sensitivity, pcm that is based on the alloying constituent content of steel is often used.

Strength-to-weight of the benefit is the work-hardening property of austenitic grade, that results in a significant intensification of the material from cold-working alone, and the elevated power duplex grades, allow reduced material width over conventional grades, so cost savings.

Fabrication: Modern steel-making technique mean that stainless can be cut, weld, formed, machined, and made-up as readily as customary steels. Austenitic microstructure of the 600 sequence provides high hardiness, from eminent temperatures to far beneath freezing, creation these steels particularly appropriate to cryogenic application.

Testing’s: a variety of good quality test known high importance’s to make sure the excellence of equipment like destructive test/ non destructive test, hydrostatic test, charpy test, mechanical test, hardness test, tensile test. furthermore test are positive material test, micro and macro test, chemical test/ spectro analysis, flattening test, ultrasonic test, radiographic test, pitting corrosion test and visual inspection.

Documentation: approved documents are offered to the customers. These are like commercial invoice, specification guide, fumigation certificates, packing list like net and gross weight, quantity. Other more documents are nabl test report, mtc report as per en 10204 3.1 or 3.2 and guarantee letter. Certificate origin by legalized manufacturer’s embassy, attested certificate by suppliers, raw material test report, mill test report, quality assurance plan, heat treatment charts.

Packaging: the products are appropriately packed in wooden crates wooden boxes, cases, and cartons, spiral wound paper tubes, individual pole wrap with stretch film and cores on its pallets.

Specification

Item Abrasion Resistant Plate
Material ABREX 600, SUMIHARD, BRINAR, DUROSTAT, DILLIDUR, JFE EVERHARD.
Thickness 3 - 200mm
Width 500 - 3000mm
Length 1000 - 12000mm
Heat Treatment N, Q+T
Surface Paint EP, PE, HDP, SMP, PVDF

Chemical Composition Of ABREX 600 Plates

Plate

C

Si

Mn

P

S

Cr

Ni

Mo

B

CEV

CET

thickness mm

max %

max %

max %

max %

max %

max %

max %

max %

max %

typv

typv

8-30

045

0.7

1.00

0.015

0.01

1.2

2.5

0.8

0.004

0.73

0.55

(30)-50

0.47

0.7

1.00

0.015

0.01

1.2

2.5

0.8

0.004

0.84

0.59

ABREX 600 Maximum Carbon Equivalent CET (CEV)

Thickness (mm) 8.00 - 24.99 25.00 - 65.00
Max CET(CEV) 0.58 (0.76) 0.61 (0.87)

Mechanical Properties Of ABREX 600 Plates

Grade

Mechanical Property

Charpy V Impact Test

ABREX 600

HBW

Elongation

Degree

longitudinal

Min Mpa

Min %

-40

J

570-640

10

20

AR 600 Plates Country Origin Make

Brand Manufacture/Co Country
Hardox 600 SSAB Sweden
QUARD 600 DUFERCO Belgium
JFE EVERHARD 360LE JFE STEEL CORPN. Japan
SUMIHARD K400 SUMITOMO METALS Japan
ABRAZO 600 TATA UK LTD. UK
RAEX 600 RUUKKI Finland
DILLIDUR 400V DILLINGER HUTTE Germany
XAR 600 THYSSEN KRUPP Germany
BRINAR 600 ILSENBURGER GROBBLECH Germany
FORA 360 INDUSTEEL Belgium
FORA 600 INDUSTEEL Belgium
HARDPLAST 380 ISD HUTA European
NICRODUR 600 ACRONI Europe
CREUSABRO 4800 INDUSTEEL Belgium
WELHARD 600 NSC/JAPAN Japan
SWEBOR 600 SWEBOR STAL Sweden
BIS Plate 320 Bisalloy Steels Pty Ltd Austrelia
BIS Plate 600 Bisalloy Steels Pty Ltd Austrelia
Rockstar 600 Essar Steel India Ltd. India
Algo Tuf 400F Essar Steel India Ltd. India
Abrex 600 NSSMC Japan
Wearalloy 600 Ford steel USA
Hardwear 400F Arcelor Mittal. Luxembourg
Roc 600 Arcelor Mittal. Luxembourg
ROCKHARD 600 JINDAL INDIA

People Also Searched for ABREX 600 Plates

abrex 600 hot rolled plate stockists in india, abrex 600 plates thickness, abrex 600 cold rolled plates supplier in mumbai, abrex 600 slitting coils exporter in india, abrex plate grade 600, abrex 600 hr plate prices, abrex gr. 600 plates in india, ar 600 plates specifications, abrex 600 cr plates properties, abrex 600 sheets & plates equivalent grade, abrex 600 hr plates in mumbai, abrex 600 plate hardness, abrex 600 plates, ar 600 plates chemical composition, abrex 600 plates & coils stockholder in mumbai, abrex 600 hr plate price list, abrex 600 plates & coils suppliers in india, abrex 600 plate traders in mumbai, abrex 600 plate exporters in mumbai, 600 abrex plates manufacturers in mumbai, abrex grade 600 plates in india, abrex 600 sheets & plates manufacturer in india, abrex 600 2d finish cr plates, ar grade 600 plates stockholder in india, abrex 600 grade plate stockists in mumbai, abrex 600 plates pdf, abrex 600 slitting coils properties, abrex 600 coils distributor, abrex grade 600 plates dealer in mumbai, ar plates equivalent.

We Offers Following Processing for ABREX 600 Sheets & Plates
  • ABREX 600 Plate Cutting
  • ABREX 600 Plate Forming Drilling / Machining
  • ABREX 600 Plate Grinding
  • ABREX 600 Plate Testing

 Cutting

 Forming Drilling / Machining

 Grinding

 Testing

Price List of ABREX 600 Sheets

ABREX 600 Plates
US $900-3000 / Metric Ton( FOB Price)

Wear Resistant ABREX 600 Plates
US $605-629 / Metric Ton( FOB Price)

ABREX 600 Abrasion Resistant Plates
US $2100-5100 / Metric Ton( FOB Price)

ABREX 600 High Strength Plates
US $500-800 / Metric Ton( FOB Price)

ABREX 600 Brinell
US $560-670 / Ton( FOB Price)

ABREX 600 HR Plates
US $900-2400 / Ton( FOB Price)

Applications of ABREX 600 Plates
  • Machine building
  • Pylons and other architectural structures
  • Lifting and mobile equipment
  • Construction of bridges
  • Wearing plates
  • Framework structures
  • Crane booms
  • Containers

 Machine building

 Pylons and other architectural structures

 Lifting and mobile equipment

 Construction of bridges

 Wearing plates

 Framework structures

 Crane booms

 Rail cars

 Stone or iron chutes

 Truck frames

 Containers

 Vehicles and transport equipment

 Steel constructions

 Anti drill plates such as security doors, shot blasting equipment and tumbling machine