What is Titanium Gr 5 Sheets & Plates
Standard Specification for Titanium Gr.5 HR Plates
Equivalent Grades of Alloy Gr 5 Sheet / Plate /Coil
Chemical Composition of Titanium Gr.5 HR Plates
Mechanical Properties of Alloy Gr 5 CR Sheets
People Also Searched for Titanium Gr.5 HR Plates
Today in the global market Triton alloys has owned the position of top leading manufacturer and supplier of the high quality of Titanium Gr 5 sheet & plate. The product can be easily cold rolled at an elevated temperature. Here post work annealing is needed for re-attaining greater performances ability. Here post heat and preheat treatment isn’t needed. Today the product is increasingly becoming popular and is used in many industrial applications all across the globe. The product specifications the product typically specifies the maximum of hydrogen limit of 150ppm. Through slow speed, rigid tooling, high feed rates, it can be machined.
With regards to several product quality standards, the product is offered to the valuable patrons at standards and custom made specifications. The product on the special demands of the buyers is easily made available at different specifications, standards, grades, wall thickness, sizes, length, forms etc. Then product to the buyers is easily made available to the buyers at reasonable rates.
Titanium grade 5 is one of the mostly used titanium alloys in fabricating many industrial applications. The alloy is characterized by excellent weldability and hot formability. Also, it is the effectively resistant marine atmosphere and range of corrosive media temperature below 300 Deg C. This grade alloy is versatile in nature.
STANDARD | WERKSTOFF NR. | UNS |
Titanium Gr. 5 | 3.7165 | N56400 |
The fabrication of the Titanium Gr 5 sheet & plate is done with the help of 100% pure quality of alloy that is collected from the reliable mills. The manufacturing of the product is done under the proper and effective guidance of professional expert’s team. They are having a well-skilled quality control team that is looking at the quality maintenance of the product that is assuring high quality of product fabrications. At the industry, the availability of the latest technology and modern tools has helped the producers in making the quality ranges of sheet and plates. The product is fabricated as per set up product production norms and according to several raw material quality standards.
There at the manufacturing unit, the testing of the material is done by the team of professional experts with the use of modern essential equipment. The tests are like positive material identification test (PMI), hardness test, pitting resistance test, intergranular corrosion test (IGC), mechanical test and chemical test. The other test like flattening test, flaring test, macro test, and micro test are conducted.
The manufacturer test certificate or MTC is also provided to the buyers in accordance with EN 10204/3.1B. 100% raw material test report, buyers test report, third-party test report, and raw material certificate are the essential test certifications provided to the buyers.
Quality assurance plan (QAP), heat treatment chart, packaging list, commercial invoice, material test report, raw material traceability report, certificate of origin, guarantee letter etc are the offered documents. This thus helps the buyers to make the right buying decision of the product from the same industry for more time.
The industry as a supplier and exporter are assuring the buyers in timely delivering of the Titanium Gr 5 sheet & plate to the buyers. They do it with the help of the fastest means of transportation like railways and airways. They are also having a good relationship with the reliable logistic partners that take full responsibility in delivering the product well on time without any delaying.
The Titanium Gr 5 sheet & plate at the time of shipping is packed using the wooden case, wooden pallets for safer and damage free shipping only.
Specifications | ASTM B265 / ASME SB265 |
---|---|
Width | 1000mm / 1219mm /1250mm / 1500mm / 2000mm |
Length | 2000 mm / 2440 mm / 2500 mm / 3000 mm / 6000 mm |
Thickness | 0.1mm to 12 mm Thk |
Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
Finish | Hot rolled plate (HR), Cold rolled sheet (CR) |
Form | Coils, Foils, Rolls, Plain Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc. |
Grade | Ti | C | Fe | H | N | O | Al | V |
Ti Grade2 | 90 min | – | 0.25 max | – | – | 0.2 max | 6 min | 4 min |
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Titanium Gr. 5 | 4.43 g/cm3 | 1632 °C (2970 °F) | Psi – 138000 , MPa – 950 | Psi – 128000 , MPa – 880 | 14 % |
titanium gr 5 sheets & plates equivalent grade, titanium gr 5 sheets specifications, steel grade n56400 titanium sheets, titanium gr 5 cr sheets properties, alloy gr 5 slitting coils properties, titanium gr 5 hr plate prices, titanium® alloy gr 5 plate traders in mumbai, titanium gr 5 sheets & coils stockholder in mumbai, ti alloy gr 5 plate exporters in Mumbai, titanium gr 5 plate stockists in mumbai,ti grade 5 sheets in india, titanium alloy gr 5 plate hardness, ti din 3.7165 plates equivalent, plate grade 5, astm b265 titanium gr 5 sheets & plates manufacturer in india, ti gr 5 plates in india, titanium grade 5 sheets stockholder in india, alloy gr 5 sheets, alloy gr 5 plates pdf, titanium alloy gr 5 cold rolled sheets supplier in mumbai, gr 5 alloy sheets manufacturers in mumbai, titanium alloy gr 5 hr plates in mumbai, alloy gr 5 cr sheets, uns n56400 sheets thickness, alloy gr 5 sheets & coils suppliers in india, titanium gr 5 slitting coils exporter in india, titanium alloy gr 5 sheets & plates chemical composition, titanium grade 5 plates dealer in mumbai, nickel alloy gr 5 hr plate price list, ti gr 5 hot rolled plate stockists in india, titanium® alloy gr 5 coils Distributor.
Cutting
Forming Drilling / Machining
Grinding
Testing
Titanium Gr 5 HR Plates
US $800-3000 / Metric Ton( FOB Price)
Hot Rolled Titanium Grade 5 Plates
US $605-629 / Metric Ton( FOB Price)
Alloy Grade 5 Cold Rolled Sheets
US $800-4000 / Metric Ton( FOB Price)
Titanium Alloy Gr 5 Plates
US $500-800 / Metric Ton( FOB Price)
Alloy Gr 5 CR Sheets
US $560-670 / Ton( FOB Price)
Titanium® Alloy Gr 5 HR Plates
US $500-900 / Ton( FOB Price)
Machine building
Pylons and other architectural structures
Lifting and mobile equipment
Construction of bridges
Wearing plates
Framework structures
Crane booms
Rail cars
Stone or iron chutes
Truck frames
Containers
Vehicles and transport equipment
Steel constructions
Anti drill plates such as security doors, shot blasting equipment and tumbling machine