Monel 400 Sheets & Plates

Monel 400 Sheets & Plates

Monel 400 Sheets, Monel 400 Hot Rolled Plates, Monel 400 Plates, Alloy 400 Coils Suppliers, Monel 400 Cold Rolled Sheets, Monel® Alloy 400 Sheets Stockist in Mumbai, India.

DIN 2.4360 Cold Rolled Sheets Exporter, ASTM B127 Monel 400 HR Plates Dealer, UNS N04400 Sheets Supplier in Mumbai, India.

Monel is a nickel alloy that has a high content of nickel and copper with other material in small quantities such as iron, manganese, and carbon. The Monel alloy is one of the most common alloys among the manufacturing industries due to its outstanding general features. It possesses comprehensive corrosion resistance, resistance to reducing acids and high strength. This alloy has been fabricated efficiently by cold and hot workability in order to enhance the strength of corrosion resistance.Monel 400 is a binary alloy that contains the same proportions of nickel and copper. This grade has been used in producing good quality sheets and plates.

It is a precious alloy; hence limited industry produces it, but the properties exhibited by the Monel are efficient and extensive. The 400 grade sheets are highly ductile and malleable in nature. The Monel 400 Sheet and plates are used in aerospace applications, oil refining, marine applications, and musical instruments.

Triton Alloys is one of the most prominent industry in the market that manufactures high quality of Monel 400 Sheet & Plate. The industry is the largest stockholder and supplier of Monel grade products. The industry is the ISO certified supplier of Offshore and Structural Steel plates to international industrial applications. These plates have excellent quality and efficiency which makes them the preferred choice among the buyers across the world. The industry has years of experience in manufacturing the good quality of sheets and plates which are offered in affordable rates to the customers.

EQUIVALENT GRADE OF Alloy 400 Sheets, Plate & Coils

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Monel 400 2.4360 N04400 NCF 400 NA 13 МНЖМц 28-2,5-1,5 NC15FE11M NiCr15Fe

While manufacturing Monel 400 Sheet & Plate, the industry use finest quality of raw material that are procured from trustworthy market vendors which are further quality tested by the industry professionals. Furthermore, the industry is committed in offering complete customer satisfaction when it comes to quality, performance and durability of the product.

In order to preserve the quality and efficiency of Monel 400 Sheet & Plate until the destination point, the industry use efficient packaging methods. The professionals of the industry wraps the Monel grade sheets and plates in large wooden cases, crates or pallets that are free fumigation and other impurities. Moreover, the industry offers relevant shipping documents along with the product. The sales representative of the company briefs with the clients and complete all the documents formalities when exporting the product out of India.

The documents are helpful for the buyers to counterpart the products with the offered documents. Also, the industry also maintains transparency with the buyers when shipping the product. Documents such as fumigation certificates, welding procedure specialization, QAP, heat treatment chart, packaging list that includes the net and the gross weight, material traceability record, material test certificates, guarantee letter and commercial invoice are some of the documents offered. Apart from the documentations, the industry offers relevant tests certifications along with the Monel grade sheets and plates. Tests certifications such as Manufacturer TC in conformance with EN 10204, raw material report, third party inspection report, radiography tests reports and other tests certifications are offered along with the products.

Triton Alloys is engaged in offering relevant material tests along with Monel 400 Sheet & Plate to the buyers across the globe. The industry professionals conduct relevant material tests on sheets and plates in order to ensure the strict quality and efficiency before finally delivering it to the customers. tests such as mechanical test, hardness test, positive material identification tests, pitting resistance test, intergranular corrosion test, spectral analysis, bend test, longitudinal test, micro and macro test and other corrosive tests are some of the tests performed on the Monel grade sheets and plates.

Specification

Specifications ASTM B127 / ASME SB127, AMS 5540
Width 1000mm / 1219mm /1250mm / 1500mm / 2000mm
Length 2000 mm / 2440 mm / 2500 mm / 3000 mm / 6000 mm
Thickness 0.1mm to 12 mm Thk
Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Finish Hot rolled plate (HR), Cold rolled sheet (CR)
Form Coils, Foils, Rolls, Plain Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc.

Chemical Composition Of Monel Alloy 400 Plates

Grade C Mn Si S Cu Fe Ni Cr
Monel 400 0.15 max 1.00 max 0.50 max 0.015max 0.50 max 6.00 – 10.00 72.00 min 14.00 – 17.00

Mechanical Properties Of ASTM B127 Monel Alloy 400 Sheets

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Monel 400 8.47 g/cm3 1413 °C (2580 °F) Psi – 95,000 , MPa – 655 Psi – 45,000 , MPa – 310 40 %

People Also Searched for Monel® Alloy 400 Sheets & Plates

monel 400 slitting coils exporter in india, monel din 2.4360 plates equivalent, monel 400 cr sheets properties, monel 400 grade plate stockists in mumbai,monel grade 400 sheets in india, alloy 400 sheets & coils suppliers in india, plate grade 400, steel grade n04400 monel sheets, alloy 400 plates pdf, monel 400 hr plate prices, monel gr. 400 plates in india, monel alloy 400 cold rolled sheets supplier in mumbai, alloy 400 slitting coils properties, monel 400 sheets & coils stockholder in mumbai, monel grade 400 sheets stockholder in india, monel alloy 400 plate hardness, alloy 400 cr sheets, monel 400 hot rolled plate stockists in india, monel alloy 400 sheets & plates chemical composition, monel 400 sheets specifications, 400 alloy sheets manufacturers in mumbai, astm b127 monel 400 sheets & plates manufacturer in india, monel grade 400 plates dealer in mumbai, monel® alloy 400 coils Distributor, monel alloy 400 hr plates in mumbai, alloy 400 sheets, nickel alloy 400 hr plate price list, uns n04400 sheets thickness, monel 400 sheets & plates equivalent grade, monel alloy 400 plate exporters in Mumbai, monel® alloy 400 plate traders in mumbai.

We Offers Following Processing for Monel 400 Sheets & Plates
  • Monel 400 Cutting
  • Monel 400 Forming Drilling / Machining
  • Monel 400 Plate Grinding
  • Monel 400 Sheets Testing

Cutting

Forming Drilling / Machining

Grinding

Testing

Price List of Alloy 400 Sheets

Monel 400 HR Plates
US $800-3000 / Metric Ton( FOB Price)

Hot Rolled Monel 400 Plates
US $605-629 / Metric Ton( FOB Price)

Alloy 400 Cold Rolled Sheets
US $800-4000 / Metric Ton( FOB Price)

Monel Alloy 400 Plates
US $500-800 / Metric Ton( FOB Price)

Alloy 400 CR Sheets
US $560-670 / Ton( FOB Price)

Monel® Alloy 400 HR Plates
US $500-900 / Ton( FOB Price)

Applications of Monel 400 Plates
  • Machine building
  • Pylons and other architectural structures
  • Lifting and mobile equipment
  • Construction of bridges
  • Wearing plates
  • Framework structures
  • Crane booms
  • Containers

Machine building

Pylons and other architectural structures

Lifting and mobile equipment

Construction of bridges

Wearing plates

Framework structures

Crane booms

Rail cars

Stone or iron chutes

Truck frames

Containers

Vehicles and transport equipment

Steel constructions

Anti drill plates such as security doors, shot blasting equipment and tumbling machine